The former is to facilitate the installation of the rim of the round table
The yams are exposed on the inner and outer sides, and the texture of the board should be cut off. Huanghuali: It is often used on the most high-end exquisite huanghuali furniture with palace style, generally older. The sections of the early classic Ming-style Huanghuali Tieli furniture were mostly square with sharp edges. Parallel arrangement: It is the most common and basic arrangement form. That is, the four wooden edges are combined into a wooden frame through the four-corner grid shoulders, and the thinner wooden boards are flattened with belts and embedded in it, so that all the wood materials are easy to absorb moisture, easy to deform, easy to crack, and unsightly. Only a few remote areas and some Guangzuoche mahogany furniture maintained square-cornered belts.
After the mid-Qing Dynasty, the national movement declined, and Su Zuo’s 'work and living' furniture materials were more carefully calculated. Walnut: mostly used for Jinzuo furniture. It can be used as a belt to 'hard down' in the belt mouth. The ancient Chinese believed that the heaven and the earth are the dominance of human beings, and that all things have anims and depend on each other to survive. Its structure is to penetrate the eye in the middle of the belt near the Maotou, and use a short support belt like a door plunger to pass through and prepare to die on the Maotou. The former is to facilitate the installation of the rim of the round table, and the latter is to prevent the cracking and deformation of the thick wooden tire.
People should live according to the laws of nature. Beauty couch. At this time, the big and small heads of the belt should be worn alternately in opposite directions, and the expansion joints should be dispersed in the front and rear large sides console tables to avoid the phenomenon of 'pulling the spring'. Now let me take you to understand what wearing belt means in ancient furniture, so that you can have a reference when you understand ancient furniture. Never chamfer edges. It can not only increase the strength, but also save labor and materials. slide. Once damaged, it is difficult to repair. After reading this article, you must have a general understanding of what wear belts refer to in ancient furniture.
In order to be able to pass through tightly within the 'belt'. So he invented the anthropomorphic gold thread white lacquered Louis style furniture and the one that does not lie down or sit crookedly. In ancient carpentry terminology, it specifically refers to a type of cross wood that penetrates the inner side of the wooden planar parts and acts as a restraint for its deformation. The belts on the furniture of the office-style furniture made by fine craftsmanship were mostly made of shading or rounded edges, which was very decorative. That is not to repeat. Zishan: It can be seen on a handful of office-style palace furniture.
